 |
FIS-SWCS
FISolution
String Wound Cartridges
The string wound cartridge filters provide true depth filtration, high dirt holding capacity, and extremely low media
migration. They are a superior, one-piece cartridge manufactured using a high speed, continuous wind process, and are available in a wide variety of lengths and porosities. Especially significant is the availability of filters in an almost endless combination of media and core material, to handle virtually any chemical and/or environment or temperature. U-Series string filter cartridges are available with 14-string, seven core and 12 material and end cap options. Outside dimensions of 2 to 6 inches and lengths of 5 to 72 inches are standard. They can be sized for virtually all single- or multi-round filter housings. The precise winding pattern defines micron ratings and results in higher dirt-holding capacity and efficiency. Our series of polypropylene string cartridges is Gold Seal Certified to the ANSI/NSF 42/61 standard.
Municipal Series String wound Filters
The Series Filter Cartridges have been tested and certified to the ANSI/NSF 42/61 standard to assure continuity of
materials and consistency in manufacturing the finished product.
Each component is identified and controlled in accordance with the registered wetted parts lists. These cartridges will not impart unwanted leached materials into the downstream flow.
Nominal micron ratings of 0.5 to 200, with 3.75- to 72-inch lengths and 2- to 6-inch outside diameters, offer a wide range of options suitable to most industry standard filter housings. Cartridges are double open ended. Optional end cap treatments available. See below.
The Cartridges are in use at state and federal correctional institutions, office buildings, municipal water districts, Department of Defense road mobile potable water systems, and other applications where the ANSI/NSF 42/61 standard is required.
FILTER CORE SELECTION GUIDE
Polypropylene: economical core of choice for most applications in water and corrosives to 200ºF.
Tin Plated Steel: General purpose metal core for oils, solvents,paints, and other non-FDA applications. For use to 400ºF.
304 Stainless Steel: For high temperature applications on diluted acids and moderately corrosive fluids. For use to 750ºF.
316 Stainless Steel: For high temperature applications on strong acids and highly corrosive fluids. For use to 750ºF.
Glass-filled nylon for strong acids and highly corrosive fluids when polypropylene is not compatible.
We provide 12 different end caps to all of their filter lines. The diversity of these end caps provides an endless variety of filtration needs for every industry.
We can provide the following end caps:
Polypro-226
PolyPro Core Extender
Open End Stainless Steel-222
Flat Open End Gasket
Custom End Cap
Closed End Stainless Steel-222
Stainless Steel Core Extender
Flat / Closed
Poly-222
Fin
Flat / Open
Plastic Molded
String Wound Cartridges
The string wound cartridge filters provide true depth filtration, high dirt holding capacity, and extremely low media
migration. They are a superior, one-piece cartridge manufactured using a high speed, continuous wind process, and are available in a wide variety of lengths and porosities. Especially significant is the availability of filters in an almost endless combination of media and core material, to handle virtually any chemical and/or environment or temperature. U-Series string filter cartridges are available with 14-string, seven core and 12 material and end cap options. Outside dimensions of 2 to 6 inches and lengths of 5 to 72 inches are standard. They can be sized for virtually all single- or multi-round filter housings. The precise winding pattern defines micron ratings and results in higher dirt-holding capacity and efficiency. Our series of polypropylene string cartridges is Gold Seal Certified to the ANSI/NSF 42/61 standard.
Municipal Series String wound Filters
The Series Filter Cartridges have been tested and certified to the ANSI/NSF 42/61 standard to assure continuity of
materials and consistency in manufacturing the finished product.
Each component is identified and controlled in accordance with the registered wetted parts lists. These cartridges will not impart unwanted leached materials into the downstream flow.
Nominal micron ratings of 0.5 to 200, with 3.75- to 72-inch lengths and 2- to 6-inch outside diameters, offer a wide range of options suitable to most industry standard filter housings. Cartridges are double open ended. Optional end cap treatments available. See below.
The Cartridges are in use at state and federal correctional institutions, office buildings, municipal water districts, Department of Defense road mobile potable water systems, and other applications where the ANSI/NSF 42/61 standard is required.
FILTER CORE SELECTION GUIDE
Polypropylene: economical core of choice for most applications in water and corrosives to 200ºF.
Tin Plated Steel: General purpose metal core for oils, solvents,paints, and other non-FDA applications. For use to 400ºF.
304 Stainless Steel: For high temperature applications on diluted acids and moderately corrosive fluids. For use to 750ºF.
316 Stainless Steel: For high temperature applications on strong acids and highly corrosive fluids. For use to 750ºF.
Glass-filled nylon for strong acids and highly corrosive fluids when polypropylene is not compatible.
We provide 12 different end caps to all of their filter lines. The diversity of these end caps provides an endless variety of filtration needs for every industry.
We can provide the following end caps:
Polypro-226
PolyPro Core Extender
Open End Stainless Steel-222
Flat Open End Gasket
Custom End Cap
Closed End Stainless Steel-222
Stainless Steel Core Extender
Flat / Closed
Poly-222
Fin
Flat / Open
Plastic Molded
