 |
FIS-FCVS
FISolution
Galvanized Filter cage
Name and specification of the goods
(1) Name of the goods: galvanized cage bone
(2) Cage specifications: custom, cold wire drawing, galvanizing
Bag cage technical parameters
The bag cage meets the technical requirements for tendering and relevant national standards;
The bag cage anti-butment ring and longitudinal ribs are evenly distributed, with sufficient strength and rigidity to withstand the gas pressure of the filter bag in the state of filtration and cleaning, which can prevent collision and impact caused during normal transportation and installation. Damage and deformation.
The bag cage is welded firmly, without the phenomenon of desoldering, virtual welding and leakage welding.
The surface of the bag cage should be smooth and smooth, without welds, bumps and burrs.
The surface of the bag cage is treated with anti-corrosion galvanizing.
The surface anti-corrosion coating has good adhesion and uniform coating thickness.
The bag cage must meet the requirements for working conditions.
Brief introduction of galvanized bag cage process
The processed bag cage was immersed in the degreasing tank for 15 minutes to remove the oil stain on the surface of the bag cage.
Remove the bag from the degreasing tank and put it into the washing tank for immersion cleaning to remove the degreaser on the bag cage.
The bag cage is taken out from the washing tank and placed in a descaling tank for descaling treatment to remove the metal oxide layer on the bag cage to enhance the adsorption force.
Remove the cage bone from the descaling tank and put it into the auxiliary tank for the plating agent treatment (ammonium chloride, zinc chloride, etc.) to enhance the adhesion of the surface of the bag cage.
The treated bag cage was placed in an oven, the temperature was set to 100 ° C, and drying was performed for 20-30 minutes to remove the moisture on the bag cage, and the bag body was kept dry.
The bag cage was taken out and subjected to zinc immersion treatment (zinc rare earth alloy, alloy aluminum, etc., processing temperature: 455 ° C ± 5 ° C).
The plated cage is cooled and passivated to change the surface potential, greatly improving the corrosion resistance of the surface, enhancing the protection effect of the plating layer on the bag cage, and at the same time making the appearance of the plating layer more beautiful in many cases. And finally finishing.
device:
Selected domestic high-quality bag cage skeleton production equipment, in the production process, if there is leakage welding, desoldering, and virtual welding equipment, it will automatically alarm, effectively ensure the firmness of the bag cage, and use the laser verticality tester to ensure the overall structure of the bag cage. The verticality.
According to the technical conditions of the filter bag frame of JB/T5917-91 bag filter, the skeleton is tested to ensure the product pass rate is 100%.
1. The cage skeleton support ring and longitudinal reinforcement are evenly distributed, with sufficient strength and rigidity, can withstand the gas pressure of the filter bag in the state of filtration and cleaning, and can prevent collision and impact during normal transportation and installation. Damage and deformation caused.
2. All the solder joints of the filter bag skeleton are firmly welded, without de-soldering, virtual welding and leakage welding.
3. The surface of the filter bag skeleton and the filter bag are smooth and smooth, without welding, unevenness and burrs.
4. The surface of the filter bag skeleton is treated with anti-corrosion treatment, and electroplating is carried out according to different needs, and the plating layer is firm.
Silicone Filter cage
The filter cage, also called the skeleton and keel, is an essential accessory for the dust collector. It is used as a frame to support the dust filter bag. It is the rib of the filter bag and is widely used in the dust removal industry. It should be lightweight and easy to install and maintain. The quality of the bag directly affects the filter status and service life of the filter bag. Our company introduces advanced automatic bag cage manufacturing equipment, using high-frequency welding machine, good processing performance, high toughness, high-strength steel wire, one-time welding forming, and treated by pickling and leaching process.
The quality of the bag cage has a great relationship with the life of the filter bag during the operation of the dust collector. Our silicone bag cage has superior performance, complete styles and specifications: the split combination has plug-in type, plug-in type and transfer type. It can be used with most dust collectors. It is an important dust removal accessory in the dust collector, which effectively improves the dust collection effect of the dust collector. The quality of the silicone bag cage coating plays a vital role in the quality, performance and service life of the bag cage. The construction and quality control must be organized according to the coating process requirements. The anti-corrosion treatment should meet the requirements of the use temperature. And the surface of the treated layer should not fall off. The quality is not lower than the standard requirements of JB/T5917-91.
Silicone pretreatment and spraying process:
a. Silicone pretreatment process: degreasing - pickling - washing - phosphating - washing. Purpose: To remove surface oil stains and rust spots.
b. Silicone spraying process: dehydration - silicone powder electrostatic spraying - high temperature curing.
The reason why the bag cage affects the damage of the filter bag mainly comes from three aspects:
1. A burr cut filter bag on the surface of the bag cage;
2. If the straight ribs used in the same diameter bag cage are less, the deformation range of the filter bag is too large during dust removal and cleaning, and the filter bag may be damaged if it is repeatedly deformed excessively for a long time;
3. the deformation, de-soldering, corrosion-broken bag cages will also cause the filter bag to repeatedly deform or rub repeatedly to cause damage.
In order to avoid the appeal problem, our company has established a complete quality inspection process, from the incoming goods inspection, production line self-inspection, inspector inspection, workshop site management personnel inspection, finished product storage inspection, each link is to ensure the quality of the establishment The "gate". Guarantee good product performance and trends in use to ensure good life and value in use.
Processing standard:
a. The production and inspection of the bag cage shall be carried out in accordance with the technical requirements for tendering and relevant national standards;
b. The bag cage support ring and longitudinal ribs are evenly distributed, with sufficient strength and rigidity to withstand the gas pressure of the filter bag in the state of filtration and cleaning, which can prevent collision and impact caused during normal transportation and installation. Damage and deformation;
c. The bag cage is welded firmly, without the phenomenon of desoldering, virtual welding and leakage welding;
d. The surface of the bag cage should be smooth and smooth, without weld defects, unevenness and burrs;
e. The surface of the bag cage is treated with anti-corrosion treatment;
f. The surface anti-corrosion coating has good adhesion and uniform coating thickness;
g. The bag cage must be used in accordance with working conditions
Galvanized Filter cage
Name and specification of the goods
(1) Name of the goods: galvanized cage bone
(2) Cage specifications: custom, cold wire drawing, galvanizing
Bag cage technical parameters
The bag cage meets the technical requirements for tendering and relevant national standards;
The bag cage anti-butment ring and longitudinal ribs are evenly distributed, with sufficient strength and rigidity to withstand the gas pressure of the filter bag in the state of filtration and cleaning, which can prevent collision and impact caused during normal transportation and installation. Damage and deformation.
The bag cage is welded firmly, without the phenomenon of desoldering, virtual welding and leakage welding.
The surface of the bag cage should be smooth and smooth, without welds, bumps and burrs.
The surface of the bag cage is treated with anti-corrosion galvanizing.
The surface anti-corrosion coating has good adhesion and uniform coating thickness.
The bag cage must meet the requirements for working conditions.
Brief introduction of galvanized bag cage process
The processed bag cage was immersed in the degreasing tank for 15 minutes to remove the oil stain on the surface of the bag cage.
Remove the bag from the degreasing tank and put it into the washing tank for immersion cleaning to remove the degreaser on the bag cage.
The bag cage is taken out from the washing tank and placed in a descaling tank for descaling treatment to remove the metal oxide layer on the bag cage to enhance the adsorption force.
Remove the cage bone from the descaling tank and put it into the auxiliary tank for the plating agent treatment (ammonium chloride, zinc chloride, etc.) to enhance the adhesion of the surface of the bag cage.
The treated bag cage was placed in an oven, the temperature was set to 100 ° C, and drying was performed for 20-30 minutes to remove the moisture on the bag cage, and the bag body was kept dry.
The bag cage was taken out and subjected to zinc immersion treatment (zinc rare earth alloy, alloy aluminum, etc., processing temperature: 455 ° C ± 5 ° C).
The plated cage is cooled and passivated to change the surface potential, greatly improving the corrosion resistance of the surface, enhancing the protection effect of the plating layer on the bag cage, and at the same time making the appearance of the plating layer more beautiful in many cases. And finally finishing.
device:
Selected domestic high-quality bag cage skeleton production equipment, in the production process, if there is leakage welding, desoldering, and virtual welding equipment, it will automatically alarm, effectively ensure the firmness of the bag cage, and use the laser verticality tester to ensure the overall structure of the bag cage. The verticality.
According to the technical conditions of the filter bag frame of JB/T5917-91 bag filter, the skeleton is tested to ensure the product pass rate is 100%.
1. The cage skeleton support ring and longitudinal reinforcement are evenly distributed, with sufficient strength and rigidity, can withstand the gas pressure of the filter bag in the state of filtration and cleaning, and can prevent collision and impact during normal transportation and installation. Damage and deformation caused.
2. All the solder joints of the filter bag skeleton are firmly welded, without de-soldering, virtual welding and leakage welding.
3. The surface of the filter bag skeleton and the filter bag are smooth and smooth, without welding, unevenness and burrs.
4. The surface of the filter bag skeleton is treated with anti-corrosion treatment, and electroplating is carried out according to different needs, and the plating layer is firm.
Silicone Filter cage
The filter cage, also called the skeleton and keel, is an essential accessory for the dust collector. It is used as a frame to support the dust filter bag. It is the rib of the filter bag and is widely used in the dust removal industry. It should be lightweight and easy to install and maintain. The quality of the bag directly affects the filter status and service life of the filter bag. Our company introduces advanced automatic bag cage manufacturing equipment, using high-frequency welding machine, good processing performance, high toughness, high-strength steel wire, one-time welding forming, and treated by pickling and leaching process.
The quality of the bag cage has a great relationship with the life of the filter bag during the operation of the dust collector. Our silicone bag cage has superior performance, complete styles and specifications: the split combination has plug-in type, plug-in type and transfer type. It can be used with most dust collectors. It is an important dust removal accessory in the dust collector, which effectively improves the dust collection effect of the dust collector. The quality of the silicone bag cage coating plays a vital role in the quality, performance and service life of the bag cage. The construction and quality control must be organized according to the coating process requirements. The anti-corrosion treatment should meet the requirements of the use temperature. And the surface of the treated layer should not fall off. The quality is not lower than the standard requirements of JB/T5917-91.
Silicone pretreatment and spraying process:
a. Silicone pretreatment process: degreasing - pickling - washing - phosphating - washing. Purpose: To remove surface oil stains and rust spots.
b. Silicone spraying process: dehydration - silicone powder electrostatic spraying - high temperature curing.
The reason why the bag cage affects the damage of the filter bag mainly comes from three aspects:
1. A burr cut filter bag on the surface of the bag cage;
2. If the straight ribs used in the same diameter bag cage are less, the deformation range of the filter bag is too large during dust removal and cleaning, and the filter bag may be damaged if it is repeatedly deformed excessively for a long time;
3. the deformation, de-soldering, corrosion-broken bag cages will also cause the filter bag to repeatedly deform or rub repeatedly to cause damage.
In order to avoid the appeal problem, our company has established a complete quality inspection process, from the incoming goods inspection, production line self-inspection, inspector inspection, workshop site management personnel inspection, finished product storage inspection, each link is to ensure the quality of the establishment The "gate". Guarantee good product performance and trends in use to ensure good life and value in use.
Processing standard:
a. The production and inspection of the bag cage shall be carried out in accordance with the technical requirements for tendering and relevant national standards;
b. The bag cage support ring and longitudinal ribs are evenly distributed, with sufficient strength and rigidity to withstand the gas pressure of the filter bag in the state of filtration and cleaning, which can prevent collision and impact caused during normal transportation and installation. Damage and deformation;
c. The bag cage is welded firmly, without the phenomenon of desoldering, virtual welding and leakage welding;
d. The surface of the bag cage should be smooth and smooth, without weld defects, unevenness and burrs;
e. The surface of the bag cage is treated with anti-corrosion treatment;
f. The surface anti-corrosion coating has good adhesion and uniform coating thickness;
g. The bag cage must be used in accordance with working conditions
