Melt Blown Filter Cartridges

Melt Blown Cartridges

Melt Blown Cartridges are manufactured from 100% Polypropylene construction. They offer excellent filtration and good thermal stability. The unique density gradient construction maximizes efficiency and minimizes pressure drop. This filter will not impart taste, odor, or color to the filtered product and has superior chemical resistance for process fluid applications. Optional Grooving effectively doubles the surface area providing lower clean pressure drop, increased dirt holding capacity and longer life. Cartridges are available in various sizes, micron ratings, and end treatments.

The MBG Series filters are gradient-density, grooved melt-blown cartridges manufactured from FDA-graded polypropylene. A cut groove process maintains open pore construction, doubling usable surface area.  They are available in 1 to 50-micron and 10 and 20-inch lengths, with optional end treatments.

MELT BLOWN SEDIMENT FILTERS

The Melt Blown Cartridges is manufactured from 100% Polypropylene construction offering excellent filtration and good thermal stability. The unique density gradient construction maximizes efficiency and minimizes pressure drop. This filter will not impart taste, odor, or color to the filtered product and has superior chemical resistance for process fluid applications. Grooving option effectively doubles the surface area providing lower clean pressure drop, increased dirt holding capacity and longer life. All these qualities resulting in a lower cost of ownership.

Cartridges are available in one to 50-micron ratings, 2.5-inch and 4.5-inch outside widths and 4-inch to 50-inch lengths, and various end cap configurations (see below) for a broad array of applications.

Applications:

• Pre Filters for Reverse Osmosis Filters

• Home Water Filtration

• Swimming Pools

• High Efficiency

Specifications:

Construction: 100% Polypropylene Media

Maximum Temperature: 180ºF (4.4ºC)

Micron Rating: One to 50-micron ratings

Maximum Differential Pressure: 50 PSID

Note: Custom lengths on request.

MELT BLOWN GROOVED SEDIMENT FILTERS

Multi-layered graded density grooved polypropylene filters are ideally suited removal of sand, silt, dirt and rust particles. Materials meet FDA specifications and are specially constructed to preclude downstream contaminate. Grooving effectively doubles the surface area providing lower clean pressure drop, increased dirt holding capacity and longer life. All these qualities resulting in a lower cost of ownership. Cartirdges are available in 1, 5, 10, 25 and 50 micron nominal filtration, both in standard 2.5-inch and big blue 4.5-inch outside diameters and 5-inch, 10-inch" and 20-inch lengths.

Applications:

• Potable Water

• Beverage

• Pre Filters for Reverse Osmosis Filters

• Fine Chemicals

• Metal Finishing

• Plating Solutions

Packaging:

Standard, 2.5 inches OD x 9.875 inches

50 per case

Big blue. 4.5 inches OD x 9.875 inches

24 per case

Choice of end caps

We provide 12 different end caps to all of their filter lines. The diversity of these end caps provides an endless variety of filtration needs for every industry.

We can provide the following end caps:

• Polypro-226

• PolyPro Core Extender

• Open End Stainless Steel-222

• Flat Open End Gasket

• Custom End Cap

• Closed End Stainless Steel-222

• Stainless Steel Core Extender

• Flat / Closed

• Poly-222

• Fin

• Flat / Open

• Plastisol Molded