Mini Pleat V Filter

Mini Pleat V Filter

The FISolution Pleat V Filter is a durable commercial or industrial air filter, suited to HVAC systems with medium to high efficiency filtration requirements.

This mini-pleat filter can remove airborne contaminants such as smoke, bacteria, fume, fungi and virus-bearing droplet nuclei. Available in M6 to H11 95% DOP efficiencies, the Pleat V Filter filter can operate in HVAC systems that face velocities up to 3.38 m/sec.

As high velocity filters, Pleat V Filter is designed to withstand the rigors of turbulent airflow, and typically used for applications in medical facilities, universities, pharmaceutical manufacturing, research facilities, foundries, power plants, food and dairy processing facilities, as gas turbine filters… or any other application where clean air and high velocities are required.

Pleat V Filter filter media is manufactured from micro glass fibre media, which is extremely resistant to moisture in high humidity environments. The media is then formed into multiple mini-pleat media packs and assembled into a series of V-banks. These are then securely bonded (fully potted) to an ABS frame casing that forms an industrial filter that is both corrosion and moisture resistant.

The Pleat V Filter’s sturdy ABS polymer frame construction ensures rigidity and thermal stability. Superior construction features that include a foam seal on the housing edge, and the mini-pleat media packs being securely bonded to the frame, eliminate chances of contaminant bypass. Vulnerable outer media pleats are also protected by sturdy metal mesh to avoid any potential risk of damage to the filter media during handling, installation or transport. (This reduces the potential risk of fingers damaging the filter media during filter installation).

FISolution Pleat V Filter filters have an extremely low initial pressure drop compared to other industrial air filters on the market. This low-pressure drop results in lower energy costs and extended service intervals.

The Pleat V Filter filter is also designed to fit all commonly used filter frames and housings; header size is 20mm, and requires only 300mm depth for installation. Installation position, service side and direction of airflow are flexible.

The F8 efficiency Pleat V Filter is suitable for use in make-up and return AHU applications in facilities located near oceans and in food processing applications where sea salt (airborne salt) is of concern, and will help to increase the life of your equipment by reducing the effects of corrosion due to salt.

The G4 efficiency  Pure-V is the recommended pre-filter to the F8 efficiency Pleat V Filter within sea salt applications.

• Tested to EN779:2012, EN1822-5:2009

• Energy Saving

• Airflows up to 1,260 l/sec

• Operates in 100% Relative Humidity

• 70° C Maximum Temperature

• High Dust Holding Capacity

• 18m2 of Effective Media Area

• Downstream Face Guard Screens (Optional)

• Other sizes available upon request